Other

Tutorial: a Scandinavian style wooden coffee table

Tutorial: a Scandinavian style wooden coffee table


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

With its clean lines and its refined use of natural materials, the Scandinavian design fully deserves its reputation, so that vintage pieces are snapped up in flea markets. So why not make your own Scandinavian furniture yourself? Today we will learn how to create a small Scandinavian-inspired wooden table.

Equipment

- a wooden board about 160 cm long, 50 cm wide and 2 cm thick - a drill with an 8 mm wood forest - wooden dowels 8 mm in diameter - a jigsaw - a hammer - a mass - a square - a tape measure - abrasive paper - wood oil - a brush - wood glue - a screwdriver - wood screws - a pencil Budget: about 25 € Duration: 4 hours

Steps

1. To start, cut out the two round trays. To do this, draw a circle 50 cm in diameter on the wooden board. Our tip: use a string or a small piece of wood that you nail in the center of a 50 cm square by positioning the end of the piece 25 cm. Turn the wooden piece by positioning a pencil at its end to trace the circle. Cut out the circle using a jigsaw. Repeat for the second tray using the first to draw the circle.
2. Then trace the feet as well as the cross which will be positioned between the two trays referring to the dimensions indicated on the photo.
3. Saw and then sand all of the wooden pieces. Apply a coat of wood oil, respecting the directions.
4. Take the two rectangular pieces. In the middle of one of them, transfer the width of 2 cm of the wood. Saw the 7 x 2 cm piece.
5. On the bottom tray, position the two rectangular pieces by making a cross. Sand lightly if necessary, the edges must be perfectly aligned before joining the pieces.
6. The two parts of the cross will be fixed with four wooden pins each. Place the marks on the lengths and transfer them to the tray. Drill the holes with a wood forest. Our tip: there are very practical assembly kits for precise location and drilling. They contain an element that attaches to the forest at the desired height. Otherwise, you can use a piece of tape as a mark that you hang on the wick.
7. Put a point of wood glue on each end of the pins, then assemble the pieces. Use the mass to assemble the pieces well.
8. Position the second plate, then screw at the cross. The side you see is the one that will be under the table.
9. Mark the locations of the feet 7 cm from the edge. Each leg is assembled with two pins. Place the marks and drill the holes for the pins.
10. Assemble the feet with a point of wood glue on each end of the pins. The feet must be very well fixed so as not to move. If necessary, add small steel brackets.

Finally

Your Scandinavian style coffee table is now complete. Optionally add a new layer of oil if the final result does not suit you. You can also paint the upper shelf white or in pastel colors for a soft and delicate decoration.

Did you like this tutorial? Send us photos of your version of this DIY on our Facebook page, and find other ideas on our Pinterest!
 



Comments:

  1. Jasper

    It's the funny answer

  2. Koltin

    Sorry for interfering, there is a proposal to take a different path.

  3. Fulop

    a Tel did not hear

  4. Henderson

    I think you are wrong. Enter we'll discuss it. Write to me in PM, we will handle it.

  5. Ash

    In my opinion, they are wrong. Let us try to discuss this. Write to me in PM.

  6. Tahkeome

    the site in the opera is shown a little incorrectly, but everything is super! Thanks for the clever thoughts!

  7. Byram

    WATCH EVERYONE! JUST SUPER !!!

  8. Balmoral

    Please take off please



Write a message