Comments

How to paint a parquet?

How to paint a parquet?

Your parquet is aging over time and you want to change? Do you want to combine aesthetics and renewal? At low cost, it is quite possible to redo its interior decoration, because it also goes through the floors! Here are some tips to put your hard-working DIY skills into practice. Find more articles on the theme: Estimate works for laying or renovating parquet

First step: prepare your parquet

In case your parquet is rough, the preparation is limited to a simple cleaning. Make sure to dust it off perfectly with a vacuum cleaner. If your parquet is already painted or varnished, it is necessary to carry out a sanding. In the trade, you will find floor sanders easy to use. It is also possible to rent them for the day in major tool stores. It is recommended to make three passes. Start the operation with coarse grains, then gradually switch to finer grains. Remember to ventilate the room well and conscientiously vacuum when the sanding is finished. In the event that irregularities persist, take a filling plaster and a spatula to fill the gaps. Let dry well as indicated on the instructions for use. Then protect your plinths with adhesive tapes provided for this purpose.

Second step: choosing and preparing the paint

You are at the stage of choosing the type of paint. Depending on your requirements, several criteria will guide you to best dress your floors. Polyurethane paint is specially designed for floors. It easily masks imperfections while retaining the ribbed appearance of the wood. It is also very resistant and washable. However, it is very toxic and also more expensive to buy. Acrylic paint is much less toxic, it dilutes with water. A big advantage in case of burrs. For this paint to adhere even better, do not hesitate to incorporate a few drops of white spirit. Whichever you choose, mix the paint well because it must be liquid enough to facilitate installation.

Make way for painting!

Using a brush, clear the corners of the room. Then draw out your telescopic handle roller which will spare your back and be very practical, then apply the first coat of paint evenly over the entire floor. Acrylic paint requires a few hours of drying but after an hour, you can already think of passing the second layer. Polyurethane paint requires ten hours of drying. So don't be in a hurry. In the same way, apply a second coat. If the result does not seem perfect, do not hesitate to make a third pass. If you use acrylic paint, a last step is to apply a varnish to vitrify your parquet and protect it. For polyurethane painting, however, no finishing is necessary. It will just take 4 to 5 days to be able to walk peacefully on your parquet.